<- 1234567 ->
List results:
Search options:
Use \ before commas in usernames
my umbrella goes directly to Bankai
aww. that sucks. i don't have any PAL isos around since i ripped my NTSC copy.

one question, is the iso produced with the PAL version bigger or smaller than the original?
Edit history:
ArmaRood: 2014-08-09 12:50:58 am
The PAL ISO is about 0.05 Gigabites smaller than the NTSC version.
my umbrella goes directly to Bankai
hm i see. i noticed the paks got a bit bigger and that's what made the final iso bigger than the original. maybe if i remove something it will be smaller and work fine...
It might just be an issue with the loader itself because I can get it to work fine with a burnt DVD, but it's worth a try
Edit history:
UchihaSasuke: 2014-08-09 01:03:45 am
UchihaSasuke: 2014-08-09 01:03:33 am
UchihaSasuke: 2014-08-09 01:03:08 am
UchihaSasuke: 2014-08-09 01:02:46 am
my umbrella goes directly to Bankai
lol now it loads.

i did the simplest thing. replaced a big song with a small one to make the iso smaller and now it loads.

nothing else was changed in the process. i did the same steps i was doing earlier that parax used too.

some of these programs get all picky when you make things bigger than what they are normally.
my umbrella goes directly to Bankai
looks like everything works.

Okay, I was able to get my NTSC ISO to work with Nintendon't, thanks, Uchiha.
where do you put the -e, -s, -i etc.? are you suppose to edit the randomizer in some program? i complete forget how to do this.
In case anyone is interested this is the result of using PAL cutscene files on an NTSC ISO

Edit history:
IzzyAxel: 2014-08-09 02:29:13 am
Quote from T3:
where do you put the -e, -s, -i etc.? are you suppose to edit the randomizer in some program? i complete forget how to do this.

Echoes_Randomizer (folder) -s (seed) -e (excluded items) -i

Make a txt file, open it in Notepad, put this ^ in it, replace the seed and excluded items with the values you want, and replace folder with the path to the root folder in quotes, then save as, give it a name, replace the .txt at the end with .bat, and save it.  Then double click on the .bat file you just saved to run the commands.
"'Echoes_Randomizer' is not recognized as an internal or external command, operable program or batch file."
Quote from T3:
"'Echoes_Randomizer' is not recognized as an internal or external command, operable program or batch file."

Oh, right, you need to have that .bat file inside the folder where the echoes randomizer EXE is.
my umbrella goes directly to Bankai
lol i got a seed that requires sanddiger to be beaten. i've never done that SW so i'm going to try a different one later and will keep this one saved for when i learn it (wasn't in the mood to play long today anyway)
Edit history:
alelau18: 2014-08-09 02:47:55 pm
Seed: 1853401841, I always get a crash while trying to pickup Grapple beam at Mining Station A (spider track), also that crash corrupted the Memory card file on Dolphin (PAL version)

found another way to enter this tunnel.
You can get into that tunnel with a ghetto jump as well.
i tried using a ghetto jump but couldn't get it to work. i think the extra height from the bsj makes it easier.
The tunnel leading towards the dark door has a little slope you can partially walk up. You wanna ghetto off that. Probably won't work if you use the wall in front of the tunnel.
west furnace access why
C:\Users\ethan\Desktop\echoes randomizer>Echoes_Randomizer (C:\Users\ethan\Deskt
op\echoes\Metroid Prime 2 Echoes [G2ME01]\root) -s (454678) -e -i
Usage: Echoes_Randomizer [folder] -s [seed] -e [excluded pickups] [options]
See the readme for more information.

Invalid seed given. Seeds must be a positive number smaller than 2147483647.
Invalid excluded pickups given. Numbers must be separated by a , with no spaces.
Each number must be between 0 and 114. See the readme for which number correspo
nds with each pickup.

C:\Users\ethan\Desktop\echoes randomizer>

could someone tell me what I'm going wrong?
Edit history:
Aruki: 2014-08-10 02:34:51 am
Aruki: 2014-08-10 02:34:21 am
Don't put parameters in parentheses. If there's a space in a parameter use quotation marks. Also, you can leave out -e if you aren't modifying the excluded pickups.

Echoes_Randomizer "C:\Users\ethan\Desktop\echoes\Metroid Prime 2 Echoes [G2ME01]\root" -s 454678 -i
Edit history:
JRP2234: 2014-08-10 03:40:22 am
A Washing Machine
I tried what Uchiha said but no it just refuses to run on nintendont.
Would there be a way to fix this issues?

The iso runs fine on dolphin so I don't know what I am doing wrong because the original prime iso runs fine on nintendont.
This is on PAL.
my umbrella goes directly to Bankai
oh, i do have one issue, the game crashes when i die since the dying images don't load and it stays in a black screen. currently i have to reset as soon as i die to avoid that.
@JRP2234 Branching off of what Uchiha said, I only deleted a file to get it to work on Nintendont. The file I deleted was named "multi-defbgm32.dsp" which is located in the Audio folder.
Edit history:
Aruki: 2014-08-10 10:35:57 am
You guys could try Dios Mios instead. I don't have any experience with Nintendont, but I haven't had any trouble getting it working with Dios Mios (without deleting anything).
Anywhere, everywhere
It seems like GC Rebuilder just breaks because it doesn't read "Game.toc" correctly. There's a feature "Do not use Game.toc" which seems like it works, but it means that you'll have to manually navigate to that folder when saving the ISO once I update the script. Either way, that should work in all of the GC loaders, while the trimmed ISO's do not.